I was able to - pair with my headset - control device volume through the headset - on receiving a call, hear ring in headset But during the call, I was unable to hear call audio. Is there any way I can help debug more?

(Assigned to Gina based on Kyle's advice.)

I'll take a look at this.

I tested with a bluetooth headset at hand and it works. We probably need more information about this to figure out the problem. Can anyone help us to provide the hcidump log? (adb shell hcidump dev0 --ascii) Thanks a lot.

Hi Gina, After testing a build made from 89cb60a08159, I'm able to pair with my headset but can no longer control device volume or hear incoming calls ring in the headset. Can you list the steps you're following to test the headset? I can get a dump while running those steps.

Hi cjones, Please check the version of Gaia. The connection part should be fixed in bug 797281. Here's the steps: 1. Enable bluetooth 2. Pair with a headset device, and you'll see the device shownin the list of "Paired Devices". 3. Choose the headset device and press "Connect". After pressing 'Connect', it starts to connect with the headset, and we can adjust volume and hear incoming calls ring in the headset if the connection process is completed successfully. Please let me know and help to attach the hcidump log (adb shell hcidump dev0 --ascii) and audio route information (adb shell | grep AudioHardware) from step 2. I can find more details from them. Thanks a lot.

Here's a log of me - pairing with headset - trying to control volume (didn't work) - receiving a call (no ringing in headset)

Build made from gaia 2ab7bd25e21b7931b700731389ad433286a18945 / inbound 89cb60a08159.

Hi cjones, Thanks for your help. After checking the log and tested with a headset device, we think the connection process is failed somehow. The reason is because we try to connect the headset immediately after pairing process, and we don't have the device service uuid at that time yet resulted in the failures of connection process. I'll discuss with Gaia team to figure out an workaround. And here's also a reference for this issue: http://androidxref.com/4.1.1/xref/packages/apps/Phone/src/com/android/phone/BluetoothHeadsetService.java#830 One possible solution is to send the system message (of type bluetooth-pairedstatuschanged) to Gaia a bit later after pairing process. For now, please press the headset device in "Paired Devices" list and choose "Connect" to connect with it manually. It should be able to successfully connect the headset, and then control volume and hear ringing in headset.

(In reply to Gina Yeh from comment #9) > For now, please press the headset device in "Paired Devices" list and choose > "Connect" to connect with it manually. It should be able to successfully > connect the headset, and then control volume and hear ringing in headset. OK, that worked! And audio was routed to my headset when I called the phone. One last issue: when I called my b2g phone, the ringtone played in my headset. But when I pressed the button on the headset to connect the call, it didn't connect. Answering the call using the gaia UI resulted in the audio being routed, though. Is that expected?

This should not be the expected behavior. When calling from our b2g phone, we should be able to hang up the phone call by pressing the button. When there's an incoming call, we can answer it by pressing the button. And for most bluetooth handsfree devices, double press can re-dial the last call number. When user press button on the headset, we'll send out a system message to Dialer based on current call status (implemented in Bug 794005), and here's the bug for UI part, bug 796224, which haven't completed yet. We should be able to answer/hang-up/re-dial the phone call via a bluetooth headset after it is revolved. :)

Excellent, thanks Gina.

Had a discussion with Evelyn from Gaia team. After completing the pairing process with a headset, we'll try to connect with it after a few seconds. If it fails, user can still press the device item and connect with it manually.

The implementation of Gaia side will be here: https://bugzilla.mozilla.org/show_bug.cgi?id=797713 Close this bug after bug 797713 lands.

Workaround in Gaia, PR https://github.com/mozilla-b2g/gaia/pull/6047

Verified fixed on Unagi build 20130103070201. Used a Motorola H730. Was able to hear the incoming ring in the headset. Was able to answer the call using the headset, and finally was able to control the audio volume using the headset. Call audio was fine.