### STR Test case : TC_AG_RSV_BV_01_I started - SDP Service record for PTS: 'Handsfree HF' successfully registered - The IUT claims support for the following eSCO LMP packet types: EV3, 2-EV3, - AT: SPP connect succeeded - AT: Service Level Connection established - AT: post SLC command sequence complete - AT: RING - AT: Received +CLIP: "0980512958",129 - AT: Incoming call established - HCI: Audio Connection enabled - MTC FAIL: HF speaker volume incorrectly set to 9 - HCI: Audio Connection disabled - AT: Call terminated - AT: Service Level Connection disabled - MTC: Test case ended Final Verdict : Fail ### Version 1. flash v166 https://mozilla.app.box.com/files/0/f/2230155871 2. flash gecko, gaia from tinderbox https://pvtbuilds.mozilla.org/pvt/mozilla.org/b2gotoro/tinderbox-builds/mozilla-aurora-flame-kk-eng/20140909171114/

This is very strange the error coming from: Message from PTS: MTC FAIL: HF speaker volume incorrectly set to 9 However, 125 Slave 46 AT+VGS=9. Current speaker gain: 9 21 00:00:00.019000 2014/9/16 下午 01:52:21.340000 127 Master 46 ..OK.. Success 19 00:00:00.035000 2014/9/16 下午 01:52:21.375000 128 Slave 46 AT+VGM=9. Current microphone gain: 9 21 00:00:00.003000 2014/9/16 下午 01:52:21.378000 130 Master 46 ..OK.. Success 19 00:00:00.053000 2014/9/16 下午 01:52:21.431000 This looks correct, and I don't think this can affect the result.

Message from PTS: MMI: Set the speaker volume of the Implemenation Under Test (IUT) to a level that is greater to the deafault/nominal level, then click Ok. I guess the problem is related to we did not send out volume up indication AT command to PTS.

After a couple of attempts, 1. Make sure the value set requested is in the note below. 2. Affected by bug 1061427 and bug 1061510, unable to send real volume data out, no matter what was shown on screen, it sent 9 to PTS suite, but a reboot can fix this. Note: Set volume greater then default, set it >= 12. Set to default, set it to 7, 8 or 9.