in state failed_pxe_booting

Sending this slave to recovery -->Automated message.

panda-0172 (even after replacing multiple SD cards; possibly bad panda board) Suggest to decommission. "Unable to read "preEnv.txt" from mmc 0:1 **" continues to loop nonstop. ** Unable to read "uEnv.txt" from mmc 0:1 ** reading boot.scr 680 bytes read Loaded script from boot.scr Running bootscript from mmc0 ... ## Executing script at 82000000 Launching PXE boot... (Re)start USB... USB: Register 1313 NbrPorts 3 USB EHCI 1.00 scanning bus for devices... 1 USB Device(s) found scanning bus for storage devices... 0 Storage Device(s) found scanning bus for ethernet devices... 0 Ethernet Device(s) found data abort pc : [<bff99852>] lr : [<bff9d751>] sp : bff00920 ip : bff04ac8 fp : 00000000 r10: 00000001 r9 : bffabde0 r8 : bff00f68 r7 : 00000000 r6 : 00000000 r5 : 00000010 r4 : bffed420 r3 : 00000006 r2 : 00000006 r1 : 00000010 r0 : bffed420 Flags: nzCv IRQs off FIQs off Mode SVC_32 Resetting CPU ... resetting ... U-Boot SPL 2012.07 (Nov 06 2012 - 14:42:50) OMAP4460 ES1.1 OMAP SD/MMC: 0 reading u-boot.img reading u-boot.img U-Boot 2012.07 (Nov 06 2012 - 14:42:50) CPU : OMAP4460 ES1.1 Board: OMAP4 Panda I2C: ready DRAM: 1 GiB MMC: OMAP SD/MMC: 0 Using default environment In: serial Out: serial Err: serial Net: No ethernet found. checking for preEnv.txt reading preEnv.txt ** Unable to read "preEnv.txt" from mmc 0:1 ** Hit any key to stop autoboot: 0

Suggest decommissioning.

Panda-0172 has been removed from chassis.